【SECRET】How to Install Speakers in a Car » Installing Car Speakers
The power of music should never be underestimated under any circumstances. If you have a car, you probably know that good music can keep you alert and attentive in the car. This is why it has become more than just luxury but a basic need to have the best music system in your car.
Sometimes the factory speakers that your car comes with may not just offer you the type of music you want. You may feel the urge to replace the speakers with other high-quality speakers like Pioneer car speakers that will allow you enjoy the quality of music that you have in mind. Have you ever found yourself in such a situation?
After buying the replacement speakers, would you hire someone or install them by yourself? There is no need at all for hiring someone to do this for you. This comprehensive article will guide you on how to install car speakers on your own.
This will give you the freedom to change your speakers as often as you feel like without spending more money paying someone to do the work for you.
See Also: Best Car Speakers
The tools required to install your car speakers
The process of installing car speakers varies from one car to another. This is normally because of some factors such as the mounting depth and height, the car’s factory wiring, the locations of the speakers among other things. While most installations are normally simple, some can be complicated particularly when dealing with component speakers
.
To be able to carry out the installation successfully, the tools that you need include Allen wrenches, Torx drivers, a file, a hobby knife, an electrical tape, soldering iron and a solder wire, a crimping tool as well as a wire cutter.
The procedure of installing new car speakers
If you want to install your car speakers, there are some laid out procedures that you need to follow to the latter to get everything perfect. The procedures are as discussed below.
1) Remove the speaker panels or grilles off
Almost all car speakers found in the interior of any car will come covered with some grill or protective paneling. Before you can be able to modify or remove the old speaker, you will have to remove this barrier. Start by prying off the grill using an ideal tool such as a flat head screwdriver. This will help you in removing anything that holds the speaker in place.
2) Remove the old factory speaker
Most speakers are normally attached to some wiring harness. You should take extra care to avoid ripping out this harness when removing the speakers. It is also common to realize that it is necessary to unscrew an extra bolt, or even chip at some adhesive foam or in some cases glue that may be holding the speakers in their places.
3) Connect the speaker to the vehicle’s electrical system
This is a very simple task. It normally involves plugging the wiring harness of the new speaker to your vehicle’s wiring harness. This might not be the exact case if your vehicle’s type of connection is not that simple. In such a situation, you will be required to connect your new speaker with a crimped or soldered connection.
This is achieved by matching the polarity of the car’s connections and the speaker’s connections. The speaker’s positive terminal is normally the largest of the two with a small dot or a “+” sign. Match the speaker’s positive terminal with the positive terminal of your car’s connection. Do the same to the negative terminals as well.
4) Test the new speaker
After connecting the speaker, it is vital to test the speaker to ascertain whether it works or not. This will help you in saving time so that you can eliminate the need to fix the problem later on. Go ahead and reconnect the negative terminal of the battery and then turn on your car’s stereo or radio. Keenly listen for the sound coming out of the new speaker.
There is no harm in looking for visible vibrations at higher volumes as well. If you speaker works, then everything is alright. If your speaker does not work, then it means that there is an issue with the electrical connection that needs to be addressed before you proceed with anything else.
5) Place the speaker securely in its place
After confirming that your new speaker works according to your expectations, you can now confidently secure it in its rightful position in the dash or even the door. You might be fortunate enough to find that your new speaker fits perfectly into the housing of your factory speaker.
In most cases though, you may need the help of some special mounting brackets, adhesives as well as drilling newer screw holes for holding the new speaker in its rightful place. At this point, there is no harm in referring to the instructions that come along with your new speaker.
After completing these steps successfully, you will have installed your new car speakers. You can now enjoy your music as you drive your car around. Your passengers will also be entertained as you drive over long distances, caught up in long traffic jams or just relaxing in the car after a long day’s work.
Read More: 2 way, 3 way, 4 way Speakers<<<
Precautions to Be Taken When Installing Your Car Speakers
While you would want to install your car speakers by yourself, there are some important precautions that you need to take while carrying out the whole process. It is very important to consider these precautions because ignoring them might lead to undesirable results.
Make sure you securely tighten everything: Speakers can produce very intense vibrations especially when the music is played at high sound levels. This might make the speaker to because loose and perhaps detach itself from its position with time. You, therefore, need to tighten it to avoid such cases.
Ensure compatibility of the new speakers with your stereo system: The new speaker’s wattage and impedance ratings should be compatible with your stereo system’s ratings. Most speakers normally have these ratings indicated somewhere at the back to make sure that you can know their ratings before buying them.
Be careful on where you use an electrical tape: Electrical tape can be used for connecting the wires in some parts of the car but is not ideal for others parts. If you intend to make your connections in the dashboards, do not use an electrical tape. This is because the changes in temperate in the dashboard can slowly weaken the electrical tape and later lead to major problems.
Wrapping up
Knowing how to install car speakers is an important skill. It will save you from spending money to hire someone to do it for you while you will also have the freedom to experience your desired sound quality from your preferred speakers.
This article has basically highlighted how to go about the whole process. The next time you will be installing new Best speakers for cars, never struggle again at doing it. It is the time to make a break from the little jail of having to listen to poor quality sound from your factory car speakers.
Have you ever installed car speakers before? Are you planning to change your car speakers soon? Simply follow the steps outlined above and get it right.